Zed Enterprises - Customized Spouting

We offer following Range of Material Handeling Equipments








  • FIXED & ADJUSTABLE ELBOWS
  • FORKS, DISTRIBUTOR, DIVERTER, FLOW RETARDER
  • COLLAR PIPE, STRAIGHT PIPES
  • REDUCER, TRANSITION PIECE, CUSION SPOUT
  • V-SEALS, FLANGES, RINGS, COLLARS
  • SLIDE GATE, SHUTTER GATE
  • INSPECTION PIPE
  • SAMPLE OUT




FIXED ELBOWS

Used when the angle of fixing duct is pre known.




ADJUSTABLE ELBOWS /

These are adjustable Elbows that can be adjusted freely to any angle from 0°to 90° by readjusting from connecting clamp portion of Multiple parts.


BEND PIPES / Miter-bend Pipes

In this type there are three different types of constructs -10°,15° & 20° which can be assembled to create bends of any size.


TWIN METER BEND

These are adjustable Elbows that can be adjusted freely to any angle from 0°to 60° by readjusting from connecting clamp portion consist of 2 portions.


SIDE OPEN / ASYMMETRICAL FORKS

Side Open or Asymmetrical fork.


Y / W Shaped - Symmetrical Fork

Y Shaped or W Shaped - Symmetrical Fork



DIVERTER

These are used to Divert the material flow in optional path by manual or electrical operation.



FLOW RETARDER

Flow retarder is used to reduce the flow of material.




COLLAR PIPE

Collar pipes are used for flow and can be eaily connected using bands / clamps as per site requirement.




STRAIGHT PIPE(S)

These Pipes are used for the straight portions of a duct path.


REDUCER / Tapered Pipes (TP)

This is being used to connect duct pipes of different diameters.


TRANSITION PIECE

It is used to connect between Square / rectangular duct to a round duct.




CUSION SPOUT

It acts as speed reducer due to friction of falling material over material in transit. It is adjustable from 0 to 45 Degrees.




V-SEALS / U - Seal / Pipe Seal / Flat Ring Seal

These are used to cover the flange portion of the duct collar to make it leak proofand connection stronger.




FLANGES

These are needed to Join Pipes and Ducts in the installation where mechanical link should be strong.




SEALING RINGS

These rings are used for preventing leak in between ducts.


COLLARS

These are used to connect the ducts with non standard incomer equipemnt by welding these collars with them.


SLIDE GATE

These gates are used to restrict the flow as required. It is operated with a wheel and connecting shaft.


SHUTTER GATE

These gates are used to close or open the flow as required. Its operation is plane shutter sliding into the frame.


INSPECTION PIPE / PORT

Inspection point for Unwanted material in Material Flow Duct




SAMPLE OUT

It is being used to take out the sample of the material for Crosschecking without stopping the flow.




SUSPENSION BAND

It is mainly used to fixing pipes at points where piping becomes unstable in a long duct path.




SPRING BAND / FILTER BAND

Tightens with a single operation, allowing smooth replacement of filters.




HINGED BAND / CONNECTING BAND

Wide Openable due to One side hinged construction and used for connecting ducts.




CONNECTED BAND

single side tighting, for connecting collar based ducts / equipment openings.




KIT KAT BAND / SPEED BAND

Finger Openable Bands without tools.




PIPE SHUTTER / FLOW CONTROL GATE VALVE

Useful for flow control for duct piping, or inlet or discharge of tanks or machines.




FLOW GATE

It is placed below storage to regulate the output flow.